How to Remove Motorcycle Helmet Visor-3 Easy Steps
How to Remove Motorcycle Helmet Visor
User-friendly helmets with additional features gained immense popularity among bike lovers. A helmet visor helps riders to see every small object plainly while protecting the eyes.
Over time, your helmet’s visor may get scrapes, scratches, or cracks, and it will interrupt you to see everything clearly. You must ensure your visor is clean and scratch-free to see what lies ahead.
That’s why it is a wise decision to change your motorcycle helmet visor when you think you are facing issues to see objects clearly through the motorcycle visor.
If you know how to remove motorcycle helmet visor, you can change it on your own.
In this article, we are going to instruct you on how to change the visor from a motorcycle helmet easily within a short time. Let’s dive in!
How Visor Works?
Some helmets have a single visor, while others have a double visor. The dual visor helmet has extended protection for eyes and full faces. Different companies manufacture their helmet differently, but all of them have similar functionality.
Most visors include a push-button, which helps to free or change the visor. Hence, it features a simple and straightforward design. However, its working method varies.
And, it is better to read the instruction manual that comes with the helmet to understand it properly.
How to Protect Motorcycle Helmet Visor?
The more careful you are, the better durability you can ensure for your motorcycle helmet visor.
As a result, it is essential to take care of your visor while riding your bike cautiously. Make sure not to drive your motorcycle in over speed because it may cause the pelting of rocks and debris.
Avoid riding in dusty or muddy environments since it may ruin your visor’s anti-fogging properties. If you still drive in that condition, make sure your helmet should not appear in the visor up.
Keep your protective headgear in a safer place to avoid unintentional falling off. It may break the glass or result in unremovable scratches. Before removing the helmet, make sure you know how to do it and avoid removing it carelessly.
A fancy or premium quality motorcycle helmet may cost more than $100. That’s why you better know how to take care of your things in the safest manner.
How to Remove Motorcycle Helmet Visor?
The reason behind knowing how to change motorcycle helmet visor is not always because of being cracked, blurry, or scratched. Sometimes you want to replace your old single visor with a new dual visor.
The double visor has a high level of protection than a single visor. Just follow our step-by-step guidelines to know how to remove the visor from the motorcycle helmet.
Step 1- Make a Preparation
Place a soft towel on a desk or table and keep your helmet on it. Keep your new visor close to yourself, which you want to replace by taking off the old one.
You have already bought a brand new one or purchased two models at the same time. Some brands offer two helmet visors in a package.
Step 2- Take Off the External Visor
Make sure you already have a screwdriver to unscrew the screws from the external visor.
You will notice many screws on both sides and unscrew all of them carefully and keep them in a safe place on the table or desk.
After unscrewing all the screws, you will notice that the visor has already been raised.
Step 3- Remove the Old Visor/Shield
Next, firmly clutch the inner shield on the side and pull it downwards.
The visor will effortlessly come out of the clasp, and you need to do it one by one on both sides. Take out the broken pieces cautiously from the internal visor if you see any of them.
You can lower or raise the visor if your helmet has a pivot mechanism. This type of helmet features a small cover, which you can open with your hands or a spanner.
You will notice a tiny spring clip inside the cover after opening it, and you can facilely pull out the clip to free it from the mechanism.
Now, your task has been completed as you have entirely removed the old visor from the helmet. It’s time to install the new visor.
How to Fix Helmet Visor?
After removing the old visor completely, you will now set up the latest or your preferred visor.
Make sure the visor you want to install is fit for your helmet because some visors may be a little bit big or small for your helmet size. You can replace the new visor by pulling it backward.
Keep your shield in a new spot by sliding it off and then secure it on the pivot mechanism. When you perfectly put the visor in the correct place, it will make a click sound.
If your helmet has screws, screw them tightly using a screwdriver. After doing everything correctly, double-check whether you have installed it in the correct place.
It may become loose if you don’t set up it tightly or in the wrong location.
When to Remove the Motorcycle Visor?
Sometimes you need to remove the motorcycle visor to clean it efficiently —because the headgear doesn’t allow you to clean it properly unless you remove the visor from its position. Your visor may become dirty or get some scrapes, abrasions, or debris due to everyday use.
To see everything clearly while riding, you must ensure the visor is spot-free or scratch-free. Furthermore, you may experience any accident while riding a bike and ruin the visor.
Make sure to change it immediately before riding it again. Else, your will endanger your life by experiencing another accident.
How to Clean a Helmet Visor?
Cleaning your helmet visor every day will ensure a good look and keep you safe. Before cleaning the visor, make sure you have already removed the paddle from it.
Take a soft fabric, soak it in hot water, and cover the cloth over the visor for 3-5 minutes. It will help to weaken the hard stains or dead bugs.
Then, use some mild formula soap on the soft fabric and scrub gently to the whole visor for 2-3 minutes without overdoing it.
Make sure not to pressure it aggressively while cleaning it. Next, take another fresh fabric to wipe off the soap from the visor surface and make sure to soak the new cloth before wiping it off.
Keep cleaning the surface until all the dish soap come off from the surface. Let the headgear dry for few hours.
If already removed the visor to clean it, place it back when it becomes completely dry. You can keep a dish soap spray bottle with you to instantly clean it whenever it becomes dirty.
Final Thoughts
Taking professional help is not only costly but also prevents you from learning your own thing. As an enthusiastic biker, you should know how to remove visor from bike helmet.
It will help you remove the old one and set up the latest one immediately without waiting for days. Plus, removing a motorcycle helmet visor is a super easy and breeze task—all you need to follow some instructions, which we have already mentioned.
Hopefully, now you have gathered enough idea on how to remove motorcycle helmet visor and change it with a new one.
Resources:
https://www.doityourself.com/stry/how-to-replace-a-coolant-temperature-sensor
7 Comments